HP G61-204TU Compaq Presario CQ61 Notebook PC and HP G61 Notebook PC - Mainten - Page 54
Remove the 2 Phillips PM2.5×7.0 screws, from each side of the hard drive.
View all HP G61-204TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Removal and replacement procedures 3. Remove the 2 Phillips PM2.5×7.0 screws 1 that secure the hard drive to the computer. 4. Grasp the Mylar tabs 2 on the hard drive, and then slide the hard drive to the left to disconnect it from the system board 3. 5. Remove the hard drive 4 from the hard drive bay. 6. If it is necessary to replace the hard drive bracket, remove the 2 Phillips PM3.0×4.0 hard drive bracket screws 1 from each side of the hard drive. 7. Grasp the 2 attached Mylar tabs 2 and pull the bracket straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Maintenance and Service Guide 4-11
Removal and replacement procedures
Maintenance and Service Guide
4–11
3. Remove the 2 Phillips PM2.5×7.0 screws
1
that secure the hard drive to the computer.
4. Grasp the Mylar tabs
2
on the hard drive, and then slide the hard drive to the left to disconnect it from
the system board
3
.
5. Remove the hard drive
4
from the hard drive bay.
6. If it is necessary to replace the hard drive bracket, remove the 2 Phillips PM3.0×4.0 hard drive bracket
screws
1
from each side of the hard drive.
7. Grasp the 2 attached Mylar tabs
2
and pull the bracket straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.