HP HotSpot LaserJet Pro M1218nfs HP LaserJet Pro M1210 Series - Hotspot Setup - Page 2
Option 3: Configure hotspot through the HP Embedded Web Server EWS - mfp
View all HP HotSpot LaserJet Pro M1218nfs manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
6 A summary of the current settings displays. Click Next. 7 You have successfully set up the hotspot feature. To set up other product features, follow the on-screen instructions. *For additional security options, see Set or change the printer admin password at the end of this guide. Option 2: Configure hotspot through the Windows Wireless Configuration utility (USB Required) Open the Wireless Configuration utility: • From the Start Menu, select All Programs. • Select . • Select the product. • Select Wireless Configuration. 2 Select Hotspot & Direct Print, and then click Next. 1 3 Select the option Enable Hotspot and Direct Print, and then click Next. Then, follow the previous steps for Option 1 starting at step 2. Option 3: Configure hotspot through the HP Embedded Web Server (EWS) (network connection required) Important: Please make sure the product and computer are able to communicate with each other on the network. If this is not possible, configure hotspot using Option 1 or Option 2. 1 Locate the product's IP address. To find the IP address, print a configuration page from the product: • Press the Setup button. • Select the Reports menu. • Select Config Report. • Press OK. 3 In the EWS, select the Hotspot & Direct Print tab. Select the Enable option, and then click Apply. Note: If a printer admin password has been set in the EWS, type it here. If you do not know the password, contact the printer administrator. For more information about setting or changing the printer admin password, see Set or change the printer admin password at the end of this guide. HP LaserJet Professional M1210 MFP HP LaserJet Professional M1210 MFP 192.168.223.1 In this example, the product IP address is 192.168.223.1. This is the number you will need for the next step. 2 To open the EWS, type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter. 4 You also have the option to review and change Security, LAN, and PPPoE settings from the navigation menu on the left. http://192.168.223.1 5 Click Apply to save the changes. *These instructions are subject to change and can vary by product. Set or change the printer admin password Use the HP Embedded Web Server to set a printer admin password or change an existing password. Note: The admin password is different than the hotspot password. Use the admin password in the EWS to set up or change the product's configuration parameters. • Open the EWS, and then click the Admin Password tab. • Type the new password in the Password box and in the Confirm Password box. • At the bottom of the window, click the Apply button to save the password. NOTE: If a password has previously been set, you are prompted to type the current password before you can change it.