HP Indigo W7250 Charge Roller -- CA393-00080 Rev 07 - Page 11

HP Indigo W7250 Manual

Get HP Indigo W7250 PDF manuals and user guides View all HP Indigo W7250 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

4. Disconnect the solenoid connector. Figure 1-15 Solenoid connector and attachment screws 1 Solenoid connector 2 Solenoid attachment screws 5. Remove the three Allen screws that attach the solenoid to the charge roller assembly. 6. Remove the solenoid assembly. Figure 1-16 Solenoid assembly 7. Install the new solenoid assembly into position. Fasten it to the charge roller assembly using the three Allen screws, washers and spring washers. 8. Connect the solenoid connector. 9. Install the solenoid connector cover. Use the Phillips screw to fasten it to the charge roller assembly. 10. Reinstall the spring and connect the front solenoid extraction clip using the Allen screw. Replacing the front solenoid 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
4.
Disconnect the solenoid connector.
Figure 1-15
Solenoid connector and attachment screws
1
Solenoid connector
2
Solenoid attachment screws
5.
Remove the three Allen screws that attach the solenoid to the charge roller assembly.
6.
Remove the solenoid assembly.
Figure 1-16
Solenoid assembly
7.
Install the new solenoid assembly into position. Fasten it to the charge roller assembly using the three
Allen screws, washers and spring washers.
8.
Connect the solenoid connector.
9.
Install the solenoid connector cover. Use the Phillips screw to fasten it to the charge roller assembly.
10.
Reinstall the spring and connect the front solenoid extraction clip using the Allen screw.
Replacing the front solenoid
9