HP Integrity rx2660 HP Insight Manager WBEM Provider Events Reference - Page 64

Error while reading the remote CC's XIN Error Mask register. Probable Cause: CC

Get HP Integrity rx2660 PDF manuals and user guides View all HP Integrity rx2660 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Event ID Event Severity 9431 Warning 9432 Warning 9433 Warning 9438 Warning 9440 Error 9441 Error 9442 Error 9445 Warning 9448 Error 9450 Warning 9460 Warning 9461 Warning 9465 Warning 9466 Error 9468 Warning Event Description Error while reading the remote CC's XIN Error Mask register. Probable Cause: CC access failure. Recommended Action: Contact HP Support personnel to check the CC. WBEM EventID: 937. WBEM ProviderName: FPL_IndicationProvider. Error clearing the init packet received bit in the XIN error mask. Probable Cause: CC access failure. Recommended Action: PDC Reviewed alert level for SR - 9/6/03 CC. WBEM EventID: 938. WBEM ProviderName: FPL_IndicationProvider. Failed to read the XBC's Port Status register. Probable Cause: fabric access failure Recommended Action: Check XBC, Check CC, Check backplane. WBEM EventID: 939. WBEM ProviderName: FPL_IndicationProvider. PDHC has detected the PDH battery low warning. Probable Cause: PDH battery power is low. Recommended Action: Replaced the PDH battery. WBEM EventID: 1037. WBEM ProviderName: FPL_IndicationProvider. FW will not handoff to the OS_MCA handler for this MCA event. Probable Cause: The error logs should be retrieved from the EFI shell prompt. WBEM EventID: 941. WBEM ProviderName: FPL_IndicationProvider. Resetting the partition because couldn't access PDH memory. Probable Cause: CPU is on unreachable cell Defective CPU Recommended Action: Contact HP Support personnel to troubleshoot cell board Investigate for fabric problem. WBEM EventID: 1766. WBEM ProviderName: FPL_IndicationProvider. Resetting the partition because a processor was not in expected state. Probable Cause: Software has not correctly returned all CPUs to sleep state Recommended Action: Reset would clear this issue. WBEM EventID: 1767. WBEM ProviderName: FPL_IndicationProvider. Halting the cell because a cell couldn't access its own PDH memory. Probable Cause: Hardware problem with the CPU or cell board. Recommended Action: Contact HP Support to confirm the CPUs and cell board are functioning properly. WBEM EventID: 1768. WBEM ProviderName: FPL_IndicationProvider. The NVRAM block table maintained by System Firmware is corrupt. Probable Cause: The NVRAM-based descriptor for System Firmware NVRAM blocks is corrupt. WBEM EventID: 942. WBEM ProviderName: FPL_IndicationProvider. Resetting cell because processor couldn't access it's own PDH memory. Probable Cause: PDC bug. Recommended Action: Contact HP Support to check for PDC upgrade. WBEM EventID: 1769. WBEM ProviderName: FPL_IndicationProvider. All CPUs were deconfigured and have now been reconfigured. Probable Cause: User test operational error. Recommended Action: Reboot system and update CPU configuration as desired. WBEM EventID: 943. WBEM ProviderName: FPL_IndicationProvider. A failure has occurred trying to get the number of CPU cores per module. Probable Cause: Hardware failure with CPU, CC or cell board. Recommended Action: Contact HP Support to confirm the CPUs, CC, and cell board are functioning properly. Update PDC if a version is available to fix this problem. WBEM EventID: 944. WBEM ProviderName: FPL_IndicationProvider. Couldn't read the topology from the XBC register. Probable Cause: Fabric Access Error Recommended Action: Contact HP Support personnel to check the XBC, Backplane, CC. WBEM EventID: 945. WBEM ProviderName: FPL_IndicationProvider. Attempt to update Cell Static Routing has failed. Probable Cause: Fabric Access Error Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 1776. WBEM ProviderName: FPL_IndicationProvider. Failed to read the XBC CSR that contains the number of failed links. Probable Cause: Fabric Access Failure Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM EventID: 947. WBEM ProviderName: FPL_IndicationProvider. 64 WBEM Provider Event Tables

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
Event Description
Event
Severity
Event ID
Error while reading the remote CC's XIN Error Mask register. Probable Cause: CC
access failure. Recommended Action: Contact HP Support personnel to check the
CC. WBEM EventID: 937. WBEM ProviderName: FPL_IndicationProvider.
Warning
9431
Error clearing the init packet received bit in the XIN error mask. Probable Cause: CC
access failure. Recommended Action: PDC Reviewed alert level for SR - 9/6/03 CC.
WBEM EventID: 938. WBEM ProviderName: FPL_IndicationProvider.
Warning
9432
Failed to read the XBC's Port Status register. Probable Cause: fabric access failure
Recommended Action: Check XBC, Check CC, Check backplane. WBEM EventID:
939. WBEM ProviderName: FPL_IndicationProvider.
Warning
9433
PDHC has detected the PDH battery low warning. Probable Cause: PDH battery
power is low. Recommended Action: Replaced the PDH battery. WBEM EventID:
1037. WBEM ProviderName: FPL_IndicationProvider.
Warning
9438
FW will not handoff to the OS_MCA handler for this MCA event. Probable Cause:
The error logs should be retrieved from the EFI shell prompt. WBEM EventID: 941.
WBEM ProviderName: FPL_IndicationProvider.
Error
9440
Resetting the partition because couldn't access PDH memory. Probable Cause: CPU
is on unreachable cell Defective CPU Recommended Action: Contact HP Support
personnel to troubleshoot cell board Investigate for fabric problem. WBEM EventID:
1766. WBEM ProviderName: FPL_IndicationProvider.
Error
9441
Resetting the partition because a processor was not in expected state. Probable Cause:
Software has not correctly returned all CPUs to sleep state Recommended Action:
Reset would clear this issue. WBEM EventID: 1767. WBEM ProviderName:
FPL_IndicationProvider.
Error
9442
Halting the cell because a cell couldn't access its own PDH memory. Probable Cause:
Hardware problem with the CPU or cell board. Recommended Action: Contact HP
Support to confirm the CPUs and cell board are functioning properly. WBEM EventID:
1768. WBEM ProviderName: FPL_IndicationProvider.
Warning
9445
The NVRAM block table maintained by System Firmware is corrupt. Probable Cause:
The NVRAM-based descriptor for System Firmware NVRAM blocks is corrupt.
WBEM EventID: 942. WBEM ProviderName: FPL_IndicationProvider.
Error
9448
Resetting cell because processor couldn't access it's own PDH memory. Probable
Cause: PDC bug. Recommended Action: Contact HP Support to check for PDC
upgrade. WBEM EventID: 1769. WBEM ProviderName: FPL_IndicationProvider.
Warning
9450
All CPUs were deconfigured and have now been reconfigured. Probable Cause: User
test operational error. Recommended Action: Reboot system and update CPU
configuration as desired. WBEM EventID: 943. WBEM ProviderName:
FPL_IndicationProvider.
Warning
9460
A failure has occurred trying to get the number of CPU cores per module. Probable
Cause: Hardware failure with CPU, CC or cell board. Recommended Action: Contact
HP Support to confirm the CPUs, CC, and cell board are functioning properly. Update
PDC if a version is available to fix this problem. WBEM EventID: 944. WBEM
ProviderName: FPL_IndicationProvider.
Warning
9461
Couldn't read the topology from the XBC register. Probable Cause: Fabric Access
Error Recommended Action: Contact HP Support personnel to check the XBC,
Backplane, CC. WBEM EventID: 945. WBEM ProviderName: FPL_IndicationProvider.
Warning
9465
Attempt to update Cell Static Routing has failed. Probable Cause: Fabric Access Error
Recommended Action: Contact HP Support personnel to analyze the fabric. WBEM
EventID: 1776. WBEM ProviderName: FPL_IndicationProvider.
Error
9466
Failed to read the XBC CSR that contains the number of failed links. Probable Cause:
Fabric Access Failure Recommended Action: Contact HP Support personnel to analyze
the fabric. WBEM EventID: 947. WBEM ProviderName: FPL_IndicationProvider.
Warning
9468
64
WBEM Provider Event Tables