HP Integrity rx2800 System Errata for HP Integrity rx2800 i2 - Page 3

Minimum firmware version required for Smart Array SAS/SATA controllers Smart Array SAS/SATA controllers installed in a rx2800 i2 system require a minimum firmware version installed to avoid instances of incorrect data transfer. The following Smart Array Controllers must be running firmware version 3.52 (or later): • Smart Array P410i Controller - This controller is integrated on the rx2800 i2 system board • Smart Array P411 Controller IMPORTANT: You must verify and update the firmware version on the P410i controller to 3.52 (or later) after installing a new rx2800 i2 system or after replacing a rx2800 i2 system board. Obtaining the latest firmware version 1. Go to http://www.hp.com. 2. Locate and click the Support & Drivers link on the main page. 3. Click the button next to Download drivers and software (and firmware). 4. Enter your product name (for example, Integrity rx2800 i2) or number and click >>. 5. Choose the OS or Cross operating system (BIOS, Firmware, Diagnostics, etc.). 6. Click Firmware - Storage Controller. 7. Select the specific Smart Array Controller (for example, P411). 8. Download and install the latest firmware version. Refer to the Release Notes or Installation Instructions for more information. 9. Reboot the server to complete the installation. Ignite-UX - Network Install to rx2800 i2 or BL8x0 i2 may fail with "Error loading symbol table" and subsequent kernel panic Issue During a network install of HP-UX to an rx2800 i2 or BL8x0 i2 system, after selecting the operating system to install, you may see the error message "Error loading symbol table" followed eventually by a panic. At least two slightly different sets of error messages may be displayed when this issue occurs: Scenario #1: ... Choose an operating system to install that your hardware supports:2 System Errata for HP Integrity rx2800 i2 Servers 3