HP Integrity rx4640 HP Integrity Servers with Microsoft Windows Server 2003 Re - Page 13

What's New in Windows Solution 5.5 This release adds several new features, enhancements, and defect fixes to the Windows Integrity solution. Here are some of the highlights: • Support for HP Integrity BL870c blade servers with the following features: - Dual-Core Intel® Itanium® 9100 series processors, 4 sockets ◦ 1.4 GHz/12 MB, 533 FSB, 100W ◦ 1.6 GHz/18 MB, 533 FSB, 100W ◦ 1.6 GHz/24 MB, 533 FSB, 100W - Industry standard DDR2-SDRAM with 24 total DIMM slots - Serial Attached SCSI (SAS) drives, 3 x 2.5-inch single form factor (2 for mirrored disks with 1 spare) - Three public mezzanine slots for I/O cards • Additional support for the following on HP Integrity BL860c and BL870c blade servers: - C3000 enclosure with OA 2.1 - Microsoft clusters - vFloppy and vFlash functionality - New I/O device: 447883-B21 PCI Express quad-port Gigabit mezzanine card • Software enhancements: - HP Smart Update Manager (HP-SUM) replaces Remote Deployment Utility (RDU) • Support for the MSA60/MSA70 SAS/SATA storage connected to the Smart Array P600 (requires firmware level 1.98 or higher) • Support for SAS clustering • Various documentation updates. • Various defect fixes. Software Requirements In addition to the software included from HP, the following software is required. Web Browser The browser-based interface to the HP Smart Setup and Smart Update CDs requires Internet Explorer version 5.1 or higher. The latest version of Internet Explorer is available from the Microsoft download site at http://www.microsoft.com/windows/ie/default.mspx. TCP/IP and SNMP HP Insight Management Agents require installation and configuration of TCP/IP and SNMP. You must install SNMP manually. If necessary, see the Microsoft Knowledge Base article #324263, How to Configure the Simple Network Management Protocol (SNMP) Service in Windows Server 2003 at http://support.microsoft.com/?kbid=324263. Utility Meter Pay Per Use (PPU) 7.1 software requires Utility Meter software version 7.3 or higher. Supported Components The following tables list the components that are supported on each server: What's New in Windows Solution 5.5 13