HP Integrity rx5670 CPU Installation Product Update
HP Integrity rx5670 Manual
View all HP Integrity rx5670 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity rx5670 manual content summary:
- HP Integrity rx5670 | CPU Installation Product Update - Page 1
CPU Installation Product Update Manufacturing Part Number: A6837-96004 July 2003 U.S.A. © Copyright 2003, Hewlett-Packard Development Company L.P. All rights reserved. - HP Integrity rx5670 | CPU Installation Product Update - Page 2
The HP Server Documentation CD-ROM has been provided with your server. It contains a complete documentation set for the server, including localized versions of key documents. Included on the CD-ROM are the Site Preparation and Operations and Maintenance guides, which contain in-depth troubleshooting - HP Integrity rx5670 | CPU Installation Product Update - Page 3
problem is bent processor pins, which can short out processor circuits. This notice emphasizes the proper method of CPU installation and cautions against potential errors. Read these instructions bent pins are observed, contact your HP representative for instructions on how to return the CPU assembly - HP Integrity rx5670 | CPU Installation Product Update - Page 4
on the CPU module. Check that the tabs and cutouts are intact and free of debris before installation. Figure 1-2 CPU Tabs and Cutouts contabs 2. Guide pins are provided on the processor extender board to assist in alignment. While these pins do not assure precise alignment, they will position the - HP Integrity rx5670 | CPU Installation Product Update - Page 5
Figure 1-3 CPU Guide Pins CPU Installation Pin Alignment Aids guidepins 3. When installing a CPU module, visually confirm that the CPU assembly is parallel to the processor extender board and - HP Integrity rx5670 | CPU Installation Product Update - Page 6
CPU Installation Pin Alignment Aids 6 Chapter 1
CPU Installation
Product Update
Manufacturing Part Number: A6837-96004
July 2003
U.S.A.
© Copyright 2003,
Hewlett-Packard Development Company L.P. All rights reserved.