HP Integrity rx6600 Site Preparation Guide, Third Edition - HP Integrity rx660 - Page 10

Table 1-2 Rack- or Pedestal-Installed Server Dimensions and Values Dimension Server weight (loaded product weight range estimate) Rack Rack dimensions (depth x width x height) Rack weight Rack unit Pedestal Pedestal dimensions (depth x width x height) Pedestal weight Minimum standalone configuration Maximum standalone configuration Value 53.4 - 68 kg (120-150 lbs.) 69.6 cm (27.4 in) x 44 cm (17.32 in) x 30.58 cm (12.04 in) Max: 68.04 kg (150 lbs) Server takes up 7U in the rack 69.3 cm (27.3 in) x 48.9 cm (19.3 in) x 42.2 cm (16.7 in) Max: 15.5 kg. (34 lbs.) 69.9 kg. (154 lbs.) 83.5 kg. (184 lbs.) Grounding The site building shall provide a safety ground/protective earth for each AC service entrance to all cabinets. Install a PE (protective earthing) conductor that is identical in size, insulation material, and thickness to the branch-circuit supply conductors. The PE conductor must be green with yellow stripes. The earthing conductor is to be connected from the unit to the building installation earth or, if supplied by a separately derived system, at the supply transformer or motor-generator set grounding point. Electrical Specifications This section provides electrical specifications for the server. System Power Specifications Available power (output) is the maximum dc power that the power supply can supply to the system. Maximum input power is what the power supply requires from the ac line to deliver that maximum dc output (given worst case efficiency and max loading). Maximum input current is the worst case/highest current given the lowest input voltage and the maximum input power. Table 1-3 lists the system power specifications. Table 1-3 System Power Specifications Parameter ac Voltage Maximum dc Output Power Maximum System Input Current Input frequency Max. per PCI/PCI-X/PCI-E Sockets Maximum Configuration2 Rating 200-240 V ac 1600 W 9 A1 47 to 63 Hz 25 W per socket 1633 W (5575 BTU) 10 System Specifications