HP J6039C HP Jetdirect 200m Print Server - (English) Administrator Guide - Page 38
TCP/IP Configuration, Introduction, Server-Based and Manual TCP/IP Configuration
UPC - 829160056487
View all HP J6039C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 TCP/IP Configuration Introduction To operate properly on a TCP/IP network, the HP Jetdirect print server must be configured with valid TCP/IP network configuration parameters, such as an IP address that is valid for your network. For general information on TCP/IP networks, see Appendix A. Server-Based and Manual TCP/IP Configuration When in a factory-default state and powered on, the HP Jetdirect print server will try to obtain its TCP/IP configuration using a server-based method, such as BOOTP/TFTP, DHCP/TFTP, or RARP. These server-based methods are described later in this chapter. The print server may also be configured manually. Manual-based tools include Telnet, a Web browser, the printer control panel, arp and ping commands (when the default IP address is 192.0.0.192), or SNMP-based management software. TCP/IP configuration values assigned manually will be retained when powered off/on. The print server can be reconfigured to use either server-based or manual configuration of TCP/IP settings at any time. ENWW 38