HP J7934A HP Jetdirect 620n Print Server Setup Guide - Page 38
HP Jetdirect EIO Control Panel Menus 38, If you specify BOOTP=NO, DHCP=NO, you can - 620n eio
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table C-1. EIO Classic Control Panel Menu (2 of 3) Menu Item CFG TCP/IP= Description Selects whether you want to access the TCP/IP menu and set TCP/IP protocol parameters. NO (default): Bypass the TCP/IP menu items. YES: Access the TCP/IP menu items. TCP/IP menus depend on your print server model. ● BOOTP=YES* enables configuration by a BootP server. ● DHCP=YES* enables configuration by a DHCP server. If DHCP=YES* and the print server has acquired a DHCP lease, you can choose to configure the following DHCP settings: ■ RELEASE: Choose YES to release, or NO to save, the current DHCP lease. ■ RENEW: Choose YES to renew the current DHCP lease, or NO not to renew the DHCP lease. ● AUTO IP=YES* will configure a link-local address. In these cases, manual configuration is turned off. If you specify BOOTP=NO, DHCP=NO, you can choose AUTO IP=YES to have a link-local address 169.254.x.x assigned automatically. If BOOTP, DHCP and AUTO IP are disabled, you can manually set the following TCP/IP parameters from the control panel: ■ Each byte of the IP address (IP) ■ Subnet Mask (SM) ■ Syslog Server (LG) ■ Default Gateway (GW) ■ Idle Timeout period (default is 270 seconds, 0 disables the timeout) ● (620n only) CFG DNS=YES* will allow you to specify the IP address of a DNS server, one byte at a time. Print a Jetdirect configuration page to verify your settings. However, note that the print server may overwrite selected parameters with values that ensure proper operation. ENWW HP Jetdirect EIO Control Panel Menus 38