HP J7934A HP Jetdirect 620n Print Server Setup Guide - Page 42
HP Jetdirect EIO Control Panel Menus 42, Table C-2., EIO Graphical Control Panel Menu 3 of 5 - default ip
UPC - 829160279466
View all HP J7934A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Table C-2. EIO Graphical Control Panel Menu (3 of 5) Menu Item Options MANUAL SETTINGS DEFAULT IP DNS SERVER IPX/SPX ENABLE Description of settings (Available only if CONFIG METHOD is set to MANUAL) Configure parameters directly from the printer control panel: ● IP ADDRESS n.n.n.n: The unique IP address of the printer, where n is a value from 0 to 255. ● SUBNET MASK m.m.m.m: The subnet mask for the printer, where m is a value from 0 to 255. ● SYSLOG SERVER n.n.n.n: The IP address of the syslog server used to receive and log syslog messages. ● DEFAULT GATEWAY n.n.n.n: The IP address of the gateway or router used for communications with other networks. ● IDLE TIMEOUT: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). Specify the IP address to default to when the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BOOTP or DHCP). ● AUTO IP: A link-local IP address 169.254.x.x will be set. ● LEGACY: The address 192.0.0.192 will be set consistent with older Jetdirect products. (620n only) Specify the IP address (n.n.n.n) of the DNS Server. ● ON: Enable the IPX/SPX protocol. ● OFF: Disable the IPX/SPX protocol. ENWW HP Jetdirect EIO Control Panel Menus 42