HP Kayak XU 04xx HP Kayak XU PC Workstation - Service Handbook for PCs with a - Page 6

HP Kayak XU PC Workstation (up to 333 MHz) Installing a Dual Processor / Replacing a processor HP Kayak XU 6/xxx PC Workstations are supplied with dual processor slots and either one or two processors installed. Single processor models can be upgraded to dual processor systems by installing the second processor accessory in the vacant slot. The second processor must be a Pentium II processor of the same speed and level-2 cache memory capacity as the first. It is installed by gently sliding the processor into the vacant processor connector slot until the two plastic clips at the sides engage to lock the processor into place. Every processor that is installed, or replaced, must be accompanied by the voltage regulator module (VRM) that was supplied with it. Each VRM is specific to the processor with which it was supplied, and should only be used with that processor. After installation of a second processor, the operating system must be reinstalled. Plastic clips 6 Bracket pillars Heat-sink Cache Memory 512 KB of level-two cache memory is integrated in the Pentium II processor package. 6-6 HP Kayak XU PC Workstation (up to 333 MHz) Mini-Tower PC Workstations