HP Kayak XU 04xx HP Kayak XU PC Workstation - Service Handbook for PCs with a - Page 7

Main Memory, Video Memory

Page 7 highlights

HP Kayak XU PC Workstation (up to 333 MHz) Main Memory The PC Workstation has four DIMM slots on the system board for installing main memory; slots A, B, C and D. Models are supplied with 32, 64 or 128 MB of main memory. If additional memory is required, up to 512 MB may be installed. Memory upgrades are available in single 32 MB, 64 MB or 128 MB ECC SDRAM modules. A serial EEPROM on the DIMM contains data on the memory speed. This information is read at each power on, and access time settings are set accordingly. Video Memory There is 4 MB of video memory already supplied on the graphics controller board. Memory may be upgraded to a maximum of 16 MB by installing a memory module of 4 MB, 8 MB or 12 MB onto the board. No switch or jumper settings need to be changed (all jumpers should be left in the positions in which they were set by the manufacturer). 6 Mini-Tower PC Workstations HP Kayak XU PC Workstation (up to 333 MHz) 6-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

HP Kayak XU PC Workstation (up to 333 MHz)
Mini-Tower
PC Workstations
HP Kayak XU PC Workstation (up to 333 MHz)
6-7
6
Main Memory
The PC Workstation has four DIMM slots on the system board for installing
main memory; slots A, B, C and D. Models are supplied with 32, 64 or 128 MB of
main memory. If additional memory is required, up to 512 MB may be installed.
Memory upgrades are available in single 32 MB, 64 MB or 128 MB ECC SDRAM
modules. A serial EEPROM on the DIMM contains data on the memory speed.
This information is read at each power on, and access time settings are set
accordingly.
Video Memory
There is 4 MB of video memory already supplied on the graphics controller
board. Memory may be upgraded to a maximum of 16 MB by installing a
memory module of 4 MB, 8 MB or 12 MB onto the board. No switch or jumper
settings need to be changed (all jumpers should be left in the positions in which
they were set by the manufacturer).