HP Kayak XU 04xx hp kayak xu series 04xx, xw series 04xx, service handbook cha - Page 12

HP Kayak XU Series 04xx and HP Kayak XW Series 04xx The ELSA GLoria Synergy+ includes 4 MB of installed SGRAM memory on the video board. Added to this, there is a preinstalled 4 MB SO_DIMM (SGRAM) memory module, giving a total of 8 MB, which cannot be further upgraded. No switch or jumper settings are need to be changed (all jumpers should be left in 2 the positions in which they were set by the manufacturer). HP VISUALIZE fx6 Hardware Accelerator The HP Kayak XW Series 0480 contains an HP VISUALIZE fx6 graphics hardware accelerator. There is a total of 18 MB of installed Synchronous Graphics RAM (SGRAM) frame buffer on the graphics controller board. HP VISUALIZE fx6 Texture Mapping Module An additional 32 MB of Synchronous Dynamic RAM (SDRAM) texture memory can be added by installing the texture mapping module accessory (D6795A) for the HP VISUALIZE fx6 Graphics Accelerator. For instructions on how to install the texture memory module, refer to the HP VISUALIZE fx6 Texture Module Installation Guide which is supplied with the accessory. Mini-Tower PC Workstations HP Kayak XU Series 04xx and HP Kayak XW Series 04xx 2-11