HP Kayak XU 04xx hp kayak xu series 04xx, xw series 04xx, service handbook cha - Page 19
Beep Codes for the HP Kayak XU800, Beep, POST, and Error Codes, Number, Description
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
A Beep Codes for the HP Kayak XU800 Number of Beeps 1 2 3 4 5 6 7 8 Description The memory refresh circuitry is faulty. Parity error in the base memory (the first 64 KB block) of memory. Memory error. Clock error. Processor test error. Input/Output (I/O) error. The processor on the system board generated an error. The system video card is either missing or faulty. Action to Take... Check that: • Memory is installed correctly. • Correct memory modules are being used. If the error still occurs, replace the memory. • Check that the system board is correctly cabled (power cables, processor and terminator). If the error still occurs, replace the system board. Check that: • Processor is correctly installed. • Termination card installed in processor slot 2 in a single processor system. If the error still occurs, replace: 1 Processor. 2 system board. • Keyboard is connected. • PCI card is installed correctly. • Termination card installed in processor slot 2 in a single processor system. • There is an installed processor(s). • Processor(s) is correctly installed in the processor slot(s). • Two installed processors have the same cache size (256 k). • Termination card is installed in processor slot 2 in a single processor system. • VRM is installed in the VRM socket in a dual processor system. If the error still occurs, replace the system board. This is not a fatal error. Check that the video card is correctly installed and cabled. If missing, install the video card. If the error still occurs, replace it with a known working video card. A-2 Beep, POST, and Error Codes