HP Kayak XW 04xx HP Kayak XW Series 0480, Accessories Installation Guide - Page 18

CAUTION NOTE HP Kayak XW 0480 PC Workstation - Installing Accessories In Your HP PC Workstation Installing Accessory Boards Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. The PC Workstation has the following accessory board slots: • Slot ISA1/PCI 5 for either a 16-bit ISA board or a full-length 32-bit PCI board • Slot PCI 4 for a full-length 32-bit PCI board (with LAN\SCSI combined interface board installed) • Slot PCI 3 can be used for a full-length 32-bit PCI board, and on selected models, a RAIDport™ connector with HP FastRAID adapter installed • Slot PCI 2 for a full-length 32-bit PCI board • Slot PCI 1 for a full-length 32-bit PCI board • Slot AGP for the video adapter board Installing the Board 1 Disconnect the computer's power cord and any LAN connection or telecommunications cable. PCI boards are configured automatically when installed in the PC Workstation. 2 Remove the computer's cover (refer to page 3) and carefully place the PC Workstation on its side. 3 Find an empty slot. Identify the location of the slot type you want to use (ISA or PCI). Some boards may have preferred locations and special installation instructions detailed in their manuals. 18 English