HP LH3000r HP Netserver LC 3 NetRAID-3Si Installation Guide - Page 46
Shared Storage Software Setup
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
6 Shared Storage Software Setup Use these procedures to install host bus adapter (interface) software, create the arrays and array file systems. Shared Storage Setup Part "6 Shared Storage Software Setup" in the Shared Storage Supplement. For Fibre Channel solutions go to Configure the Storage Devices using FCArray Assistant in the supplement Create the Array File Systems Use the instructions below and Windows NT Disk Administrator to partition, assign drive letters, and format the shared logical drives. Reboot System A Reboot System A so that Windows NT can recognize the logical drives created when you setup the shared storage. The system boots and loads Windows NT on System A. CAUTION You must reboot System A to get accurate information about your shared disks before running Disk Administrator. Run Windows NT Disk Administrator From the Start menu, choose Programs, Administrative Tools, and then Disk Administrator. Disk Administrator loads and scans the disks, and displays a list of the logical disks you identified. An example display follows: NOTE Disk Administrator lists disks in order, beginning with local (non-shared) disks followed by the shared disk arrays. HP NetServer Installation Guide 36