HP LH3000r HP Netserver LC 3 NetRAID-3Si Installation Guide - Page 7
HP 18.2 GB 7200 rpm Low Profile Ultra SCSI Disk Module D7174A
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cabinet RAID arrays No. of cabinets Model Status SCSI ID Disk SCSI Ids Disk drives: Cables LANs LAN connection NIC: Model Driver No. of NICs SPU I\O slot A RAID array (logical disk) must be composed of all the same disk model (i.e., part number and suffix). Different size or speed disks are not allowed in the same RAID array. Any combination of disk models is allowed on a SCSI channel. Any combination of disk models is allowed in a cluster. RAID arrays may not span NetRAID Adapters. 1 - 3 Rack Storage/12 D5989B plus 1 D6205B for each Rack Storage/12 5 (fixed) 0 - 3, 8 - 15 (fixed) HP 9.1 GB Ultra SCSI Disk Module D6106A HP 9.1 GB Ultra SCSI Disk Module D6107A HP 18.2 GB Ultra SCSI Disk Module D6108A HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A Any 2 HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or equivalent The intra-cluster LAN may only be used for cluster node communication via a crossover cable. It may not be used for client communication. Client LAN Any LAN HP D5013A/B (10/100TX PCI) 3.27.00.0001 or later 1 P4 Any that is on both the HP Tested Products List and the Microsoft Hardware Compatibility List. Any driver NOTE If the NIC used is the same as the Intra-cluster LAN, then the Client LAN must use the same driver as the Intra-cluster LAN. 1 minimum P1 3