HP LH4r How to perform unattended NOS installation Using HP Toptools Remote Co - Page 4

; Choose whether some network programs included in W2K are installed InstallDefaultComponents = Yes [NetAdapters] ; Set the names of the different LAN adapters LanCard1 = params.LanCard1 [params.LanCard1] ; When many LAN Adapters are installed, the InfID must be SET exactly to separate them InfID = "*" [NetProtocols] ; Choose which Network protocols must be installed MS_TCPIP = params.TCPIP [params.TCPIP] ; Set the options values for TCP/IP DHCP = Yes ;DNSDomain = dns.hp.com ;DNSServerSearchOrder = dns1.hp.com , dns2.hp.com ;EnableLMHosts = Yes ;DefaultGateway = 192.168.100.254 ;IPAddress = 192.168.100.1 ;SubnetMask = 255.255.255.0 WINS = No ;WINSServerList = 192.168.0.253,192.168.1.253 [NetOptionalComponents] ; Set the optional values for the protocol DHCPServer = 0 DNS = 0 SNMP = 1 NETMONTOOLS = 1 WINS = 0 [SNMP] ; Set the parameters for a specific network service Accept_CommunityName = public:Read_Create Any_Host = Yes Community_Name = public Contact_Name = Administrator Location = Public Service = Physical, Applications, Datalink, Internet, End-to-End Send_Authentification = No Traps = 192.168.100.1 # This IP address depends on the particular implementation [Identification] ; Set which Workgroup or Domain to join JoinWorkgroup = HP-LABS # This workgroup depends on the particular implementation [Data] ; Informs W2K Setup loader that an unattended installation is being performed UnattendedInstall = Yes 4