HP LH4r How to perform unattended NOS installation Using HP Toptools Remote Co - Page 9
Configuring the TFTP information from the TT_RCC
 |
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• From the C:\ directory, double-click on tftpserv.exe. A DOS command prompt window appears and launches the TFTP server on your NT client workstation. • Minimize or move the window, but do not press Enter to quit or close it. 4. Configuring the TFTP information from the TT_RCC • From the HP Toptools Remote Control Card software interface, click the Remote Control tab. • If prompted, log on as ADMIN using the password ADMIN. • Click on Power on or Power cycle / Remote Boot ... • Enter the IP address of the TFTP server = for example:192.168.100.1 • Enter the file name (*.dsk) you want to load via the TT_RCC 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
9
•
From the C:\ directory, double-click on tftpserv.exe. A DOS command prompt window appears
and launches the TFTP server on your NT client workstation.
•
Minimize or move the window, but do not press Enter to quit or close it.
4. Configuring the TFTP information from the TT_RCC
•
From the HP Toptools Remote Control Card software interface, click the
Remote Control
tab.
•
If prompted, log on as
ADMIN
using the password
ADMIN
.
•
Click on
Power on or Power cycle / Remote Boot ...
•
Enter the IP address of the TFTP server = for example:192.168.100.1
•
Enter the file name (*.dsk) you want to load via the TT_RCC