HP LH4r hp lp 2000r and virtual array config guide — for Microsof - Page 4
Server, Network
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
lp2000r2k71/74 Microsoft® and HP Certified Server Configuration Parameter Server I/O card slot Network interfaces Boot device Specification PCI slot 2, HP D8602B HBA for shared storage Embedded NICs for both intra-cluster (heartbeat) and client LANs Embedded SCSI Intra-Cluster (Heartbeat) LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification HP D5954A crossover cable, or equivalent. The intra-cluster LAN may only be used for cluster node communication. It may not be used for client communication. One Embedded NIC - LAN A, or any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List. For embedded NIC, hptxnt5.sys, version 4.02.27, or later (driver obtained from Navigator CD-ROM L.20.00, or later). For other NICs, any vendor-supported driver. Client LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification Any LAN One Embedded NIC - LAN B, or any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List. Vendor-supported driver If the NIC used is the same type as that of the intra-cluster LAN, then the client LAN driver must be the same as that of the intra-cluster LAN. 3/8/02 4