HP LH4r hp lt 6000r and virtual array config guide — for Microsof - Page 1
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP Netserver LT 6000r with HP Surestore Virtual Array 7100/7400 Windows® 2000 Advanced Server Cluster Configuration Guide Introduction This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of two HP Netserver LT 6000r servers and one HP Surestore VA 7100 or VA 7400 disk drive enclosure, with Microsoft® Cluster Server software. These configurations provide high server cluster availability and minimize single points of failure (SPOFs). A configuration certified and supported by both Hewlett-Packard and Microsoft® is included, but any cluster configuration that conforms to the guidelines of this document will be supported by Hewlett-Packard. Deviations from the supported configurations can result in an inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs. Therefore, deviations are not supported. For revision/update information on this document, refer to Versions on page 9. Cluster Configuration Elements This section identifies the hardware components, system software, network interfaces, and power distribution arrangement required to build an operational server cluster supported by Hewlett-Packard. The various server cluster elements are listed below, and their associated configuration data is detailed in separate tables and illustrations that follow. • Server configuration • Shared storage configuration • Microsoft® and HP certified server configuration • Intra-cluster (heartbeat) LAN configuration • Client LAN configuration • FC cabling configuration • Supported Fibre Channel topologies • Power distribution configuration Server Configuration Parameter Server Type Number of nodes Clock speed Number of CPUs BIOS CPU cache Specification HP Netserver LT 6000r, Ultra2 or Ultra3 embedded SCSI models Two Do not mix ultra2 and ultra3 models within a cluster. Each node must be the same server type, but nodes may differ in their CPU clock speeds and cache sizes, and amounts of main memory. 550 MHz This certification covers any CPU rate within 500 MHz of the certified speed. Two to six Ultra2 models -Version range 4.06.26 PW to 4.06.43 PW Ultra3 models -Version 4.06.43 RL or later Any size 3/8/02 1