HP LH4r hp lt 6000r and virtual array config guide — for Microsof - Page 4
Server, Network
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Microsoft® and HP Certified Server Configuration Parameter Specification Server I/O card slot PCI slot 4, HP D5013B Client LAN PCI slot 6, HP D8602B HBA for shared storage Other network interfaces Embedded NIC for intra-cluster (heartbeat) Boot device Embedded SCSI lt6000r2k71-74 Intra-Cluster (Heartbeat) LAN Configuration Parameter Network Connection Specification HP D5954A crossover cable, or equivalent. NIC Quantity Model Driver The intra-cluster LAN may only be used for cluster node communication. It may not be used for client communication. One Embedded NIC, or any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List. For embedded NIC, hptxnt5.sys, version 4.02.27, or later (driver obtained from Navigator CD-ROM L.20.00, or later). For other NICs, any vendor-supported driver. Client LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification Any LAN One HP D5013B or any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List. For D5013B, hptxnt5.sys, version 4.02.27 or later (driver obtained from Navigator CD-ROM L.20.00, or later) For other NICs, any vendor-supported driver If the NIC used is the same type as that of the intra-cluster LAN, then the client LAN driver must be the same as that of the intra-cluster LAN. 3/8/02 4