HP LH4r hp netserver lc 2000 netraid-4m config guide — for Micros - Page 3
Enclosure, Cables, Power distribution, Server
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
lc2000nt4m Shared Storage Configuration Parameter SCSI ID Channels RAID levels Containers Configuration options Enclosure Disk drives Number of cabinets Model Status SCSI ID Disk SCSI IDs Cables SCSI Power distribution Layout Specification 6, 7 0, 1, 2, 3 All fault-tolerant RAID types supported by controller: 1, 5, 10 (stripe set of mirror sets RAID 0/1), 50 (stripe set of RAID-5 sets), volume set of mirror sets, volume set of RAID-5 sets Single-level or multi-level Must be fault-tolerant Eight, maximum, per cluster Write cache disabled Clustering enabled Domain validation enabled Any HP drive supported by storage enclosure. Any combination of HP disk models is allowed in a diskset, on a SCSI channel, or in a cluster. Up to eight Rack Storage/12 D5989B, containing two D6025B SCSI controller cards, or Rack Storage/12 D5989C, containing two D6025C SCSI controller cards 5 (fixed) 0-3, 8-15 (fixed) Any two HP LVD SCSI offset cables per RS/12 from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A See SCSI cabling diagram on page 5. Redundant power distribution units (PDUs) are recommended. See power cabling diagram on page 6. Microsoft® and HP Certified Server Configuration for Ultra2 Models Parameter Server I/O card slot Network interfaces Boot device Specification PCI slot 1, NetRAID-1M local storage controller PCI slot 5, NetRAID-4M shared storage controller PCI slot 3, Client LAN, model D5013B NIC NetRAID-1M local storage controller Microsoft® and HP Certified Server Configuration for Ultra3 Models Parameter Server I/O card slot Specification PCI slot 5, NetRAID-4M shared storage controller PCI slot 6, NetRAID-1M local storage controller 1/28/02 3