HP LH4r hp netserver lc 2000 netraid-4m config guide — for Micros - Page 4
HP 10/100TX PCI, Model D5013A/B, or any LAN adapter that is on both the HP
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Microsoft® and HP Certified Server Configuration for Ultra3 Models Parameter Network interfaces Boot device Specification PCI slot 3, Client LAN, model D5013B NIC NetRAID-1M local storage controller lc2000nt4m Intra-Cluster (Heartbeat) LAN Configuration Parameter Network Connection Specification HP D5954A crossover cable, or equivalent. NIC Quantity Model Driver The intra-cluster LAN may only be used for cluster node communication. It may not be used for client communication. One HP 10/100TX PCI, Model D5013A/B, or any LAN adapter that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List For D5013A/B, Hptxnt.sys, version 4.02.35, or later (driver obtained from Navigator CD-ROM L.20.00, or later) Client LAN Configuration Parameter Network Connection NIC Quantity Model Driver Specification Any LAN One, minimum Any model that is on both the HP Tested Products List and the Microsoft® Hardware Compatibility List Vendor-supported driver If the NIC used is the same as that of the intra-cluster LAN (model D5013B), then the client LAN driver must be the same as that of the intra-cluster LAN. 1/28/02 4