HP LH4r HP Netserver LH 4 Rack Storage/12FC Cluster Config Guide for Windows - Page 2

Operating system Service pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order M/S Certified Configuration Storage Microsoft Windows NT Server 4.0, Enterprise Edition SP6a or later HP NetServer LH4 400, 450, 500, 550, 700 MHz 2 - 4 4.06.22 PS or later (400 - 550 MHz) 4.06.32 PS or later (700 MHz) Any size 128 MB minimum. Must be HP. 3 required, 4 for redundancy See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, Embedded A, Embedded B, PCI-1, PCI-2, PCI-3, PCI-4, PCI-5, PCI-6, PCI-7, PCI-8 P1 - Shared storage FC HBA (D8602A) P3 - Client LAN (D5013B) P4 - Intra-cluster (Heartbeat) LAN (D5013B) P7 - Local storage (NetRAID-1Si) Local Controller Drivers Cabinets (Physical drive location) Disk drives (hot swap or fixed) SCSI bus SCSI Ids May use embedded SCSI, embedded DAC, NetRAID-3Si or NetRAID-1Si. For embedded SCSI, use sym_hi.version 4.12 or later. For embedded DAC and NetRAID-xSi, use mraidnt.sys version 2.24. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12), any number. Must be HP. Any HP cables that meet SCSI specifications and any SCSI bus speed. Any Shared HP Rack Storage/12FC Host Bus Adapter Model No. of HBAs Driver RAID level Cabinet RAID arrays No. of cabinets FC Array Cards Required HP D8602A 1 Hhba5100.sys 1.12 or later 0, 1, 3, 5 Not more than 8 physical drives per logical array and not more than 8 LUNs are permitted per Rack Storage/12FC and Rack Storage/12 combination in a cluster. 1 2