HP LH4r HP Netserver LP 2000r FC Config Guide for Windows 2000 Advanced Serve - Page 3

RAID level Cabinet RAID arrays No. of cabinets FC Array Cards Model No. of cards/cabinet Firmware FC Array Assistant Status SCSI ID Disk SCSI IDs Disk drives: Fibre-channel cables 0, 1, 3, 5, 10 For SPOFless configurations, a fault-tolerant RAID type, e.g. RAID 5, is recommended for all shared storage. HP Rack Storage 12/FC - D5991A Not more than 8 physical drives per logical array and not more than 8 LUNs are permitted per cluster. 1 HP Fibre Channel Array Controller - D5990A 2 (Requires second card be installed in the Rack Storage/12FC.) 5.46-04 (Navigator L.18.04.5 or later) A.002-5 5 (fixed) 0 - 3, 8 - 15 (fixed) Any HP drive supported by storage enclosure Optical (Server to Hub only): 50 meter D6980A 100 meter D6981A Copper (Shared Storage to Hub and Server to Hub ): 3 meter D6978A 5 meter D6979A 10 meter D7080A Hub Model Quantity HP D6976A 6-port fibre channel Or HP P4459A 8-port switch 1 for SPOF 2 for SPOFless with hubs HP Rack Storage/12 Number of cabinets: Model Status SCSI ID Disk SCSI IDs Disk drives: Cables LANs LAN connection Optional 1 - 2 HP Rack Storage/12 - D5989B or C plus two D6025B or two D6025C SCSI cards for each cabinet 5 (fixed) 0 - 3, 8 - 15 (fixed) Same as HP Rack Storage/12FC Any HP LVD SCSI cables from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A Intra-cluster (Heartbeat) LAN HP D5954A crossover cable or equivalent The intra-cluster LAN may only be used for cluster node communication via a crossover cable or VLAN. It Client LAN Any LAN 3