HP LH4r hp netserver lt 6000r netraid-4m config guide — for Micro - Page 1

HP LH4r - NetServer - 256 MB RAM Manual

Page 1 highlights

HP Netserver LT 6000r with NetRAID-4M (HP Rack Storage/12) Windows NT® Server 4.0 Enterprise Edition Cluster Configuration Guide Introduction This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of two HP Netserver LT 6000r servers and up to eight HP Rack Storage/12 disk drive enclosure(s), with Microsoft® Cluster Server software. These configurations provide high server cluster availability and minimize single points of failure (SPOFs). A configuration certified and supported by both Hewlett-Packard and Microsoft® is included, but any cluster configuration that conforms to the guidelines of this document will be supported by Hewlett-Packard. Deviations from the supported configurations can result in an inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs. Therefore, deviations are not supported. For revision/update information on this document, refer to Versions on page 7. Cluster Configuration Elements This section identifies the hardware components, system software, network interfaces, and power distribution arrangement required to build an operational server cluster supported by Hewlett-Packard. The various server cluster elements are listed below and their associated configuration data is detailed in separate tables and illustrations that follow. • Server configuration • Shared storage configuration • Microsoft® and HP certified server configuration • Intra-cluster (heartbeat) LAN configuration • Client LAN configuration • SCSI cabling and power distribution configuration Server Configuration Parameter Server Type Number of nodes Clock speed Number of CPUs BIOS CPU cache RAM Specification HP Netserver LT 6000r, Ultra2, or Ultra3 embedded SCSI models Two Do not mix ultra2 and ultra3 models within a cluster. Each node must be the same server type, but may have different number of CPUs, clock speeds, and main memory and cache sizes. 900 MHz This certification covers any CPU rate within 500 MHz of the certified speed. Two to six Ultra2 models- Version range 4.06.33 PW to 4.06.43 PW Ultra3 models- Version 4.06.43 RL, or later Any size 128 MB, minimum. Must be HP. 1/28/02 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

1/28/02
1
HP Netserver LT 6000r
with
NetRAID-4M (HP Rack Storage/12)
Windows NT
°
Server 4.0 Enterprise Edition
Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two HP Netserver LT 6000r servers and up to eight HP Rack Storage/12 disk drive enclosure(s), with
Microsoft
Cluster Server software.
These configurations provide high server cluster availability and
minimize single points of failure (SPOFs).
A configuration certified and supported by both Hewlett-Packard
and Microsoft
is included, but any cluster configuration that conforms to the guidelines of this document
will be supported by Hewlett-Packard.
Deviations from the supported configurations can result in an
inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs.
Therefore, deviations
are not supported.
For revision/update information on this document, refer to
Versions
on page
7
.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard.
The various
server cluster elements are listed below and their associated configuration data is detailed in separate tables
and illustrations that follow.
Server configuration
Shared storage configuration
Microsoft
and HP certified server configuration
Intra-cluster (heartbeat) LAN configuration
Client LAN configuration
SCSI cabling and power distribution configuration
Server Configuration
Parameter
Specification
Server
Type
HP Netserver LT 6000r, Ultra2, or Ultra3 embedded SCSI models
Number of nodes
Two
Do not mix ultra2 and ultra3 models within a cluster.
Each node must be the
same server type, but may have different number of CPUs, clock speeds, and main
memory and cache sizes.
Clock speed
900 MHz
This certification covers any CPU rate within 500 MHz of the certified speed.
Number of CPUs
Two to six
BIOS
Ultra2 models—
Version range 4.06.33 PW to 4.06.43 PW
Ultra3 models—
Version 4.06.43 RL, or later
CPU cache
Any size
RAM
128 MB, minimum.
Must be HP.