HP LH4r HP Netserver LXr 8000 for Compaq 4000/7000 Racks - Page 16
Grasp the handle and pull module out of bay see
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 3 Installation WARNING The installation handles are mounted on the sides of the NetServer forward of the center of balance. Safe handling of the NetServer requires that the power supply modules be removed from the rear of the NetServer prior to installation in the rack equipment enclosure. By removing the power supply modules, the center of balance shifts forward and allows you to lift and handle the NetServer safely. To remove a power supply module: • Pull down on the handle until power supply module ejects (see Figure 3-5). • Grasp the handle and pull module out of bay (see Figure 3-5). WARNING Do not touch any metal object to the power supply connector contacts. High electrical currents are stored in the module even after it has been removed which may result in fire or bodily injury if terminals are shorted-circuited. 12