HP LH4r HP Netserver LXr 8000 Surestore E Config Guide for Windows NT4.0 Clus - Page 2

Service pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: Storage SP4 or later HP NetServer LXr 8000 400 and 450 MHz 2 - 4 ASPN1.86L.0003.P03.981041252 or later Any size 256 MB minimum. Must be HP. 3 See Local Storage below. P3, P4, or P7 - Shared storage controller P1 - Local storage P5 - Intra-cluster (Heartbeat) LAN P6 - Client LAN All others - Any other plug-in cards. Local Physical drive location Disk drives Controller SCSI bus Shared Host Bus Adapter Model No. of HBA Driver SPU I/O slot SCSI ID Disk Array Controller Model No. of controllers Firmware RAID level (internal) Logical disks Hot spare SCSI ID Disk Array Storage Model SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/8 or /12) Must be HP May use embedded SCSI or NetRAID-3Si in PCI slot P1 otherwise any controller listed on the HP Tested Products List. May not use embedded RAID, NetRAID-1, NetRAID-3, or NetRAID1Si. Any HP cables that meet SCSI specifications and any SCSI bus speed HP A5252B Wide Differential SCSI Adapter 1 - 3 per NetServer Adaptec AHA-294X/AHA-394X/AIC-78XX SCSI Controller driver in NT 4.0 SP4 or later P3 (1st HBA), P4 (2nd HBA), P7 (3rd HBA) 7 HP A3706A 96MB Controller with SureStore E 12H 2 per SureStore E 12H HP54 or later (SureStore E 12H NT 3.0 release) 1/0 and 5 Logical units within each array must be numbered from 0 - 7 Active Hot Spare 0 - 6 or 8 - 15 HP A3700AB SureStore E 12H Disk Array 2