HP LH4r HP Netserver LXr Pro Configuration Guide - Page 1

HP NetServer LXr Pro with AutoRAID Oracle Parallel Server Configuration Guide 13 July 1998 Introduction This document defines the supported HP NetServer LXr Pro configuration for Oracle Parallel Server. This configuration minimizes single points of failure, provides maximum availability, and has been certified by Hewlett-Packard and Oracle. This guide is prescriptive; it describes the HP NetServer LXr Pro configuration supported by HP. Any configuration not expressly allowed by this guide will not be supported by HP. What's Defined in a Racked Cluster • Cluster • SPUs • Local and Shared Storage • Public and Private LANs Cluster Type of SPUs Number of nodes Shared Storage LANs: Public LAN Intra-cluster (Private) LAN Power source HP NetServer LXr Pro Model 1 Each node must be the same model SPU, but may have different size main memory, cache, and number of CPUs (at least 2 are required). 2-4 HP AutoRAID Model 12H. See Shared Storage below. Any NIC that is HP approved. See Client LAN below. HP D5013A. See Intra-cluster LAN below. Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. System software: Oracle 8.0.4.1.4