HP LH4r HP Netserver LXr Pro Configuration Guide - Page 2

Navigator version Operating System Service pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots: G.01.00 or later Microsoft Windows NT Server 4.0, Enterprise Edition or later SP3 and TCP/IP patches. HP NetServer LXr Pro Model 1 200 MHz. 2 - 4 (at least 2 are required) 1.00.09CD0L or later Any size 128 MB minimum. Must be HP. 3 Internal or external, using any controller. Must use HP disks. See Local Storage below. P4, [P5] - Adaptec AHA-2944UW SCSI controller P2 - Public LAN Network Interface card P1 - Private LAN Network Interface card (HP D5013A) All others - Any other plug-in cards. Storage Local Physical drive location Disk drives Controller SCSI bus Shared Controller Model No. of controllers Firmware Driver SPU I/O slot SCSI ID BIOS Configuration options: Cabinet Model Firmware Revision No. of cabinets Disk drives: SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/8) Must be HP SPU embedded controller or any controller (any number, manufacturer or driver) in any available I/O slot. Certified configuration used embedded SCSI B. Any HP cables that meet SCSI specifications and any SCSI bus speed Adaptec AHA-2944UW Use with HP AutoRAID Model 12H (A3700 AZ) only. 1 - 2 v1.32.1 Aic78xx.sys (version 4.0 from Service Pack 3) P4, [P5] 6, 7 Host Adapter SCSI Termination: Automatic Reset SCSI Bus at IC Initialization: Disabled Host Adapter BIOS: Disabled HP AutoRAID Model 12H (A3700 AZ) HP26 or HP32 1 - 2 Any supported AutoRAID disk 2