HP LH4r Power Supply Upgrade Guide - Page 16
HP NetServer LH 6000/6000r: Installing a Power Supply and Fan, Unlock
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 3 HP NetServer LH 6000/6000r: Installing a Power Supply and Fan Install Power Supply Fan Module The redundant power supply fan module allows the NetServer to keep operating in case the original fan fails. 1. Locate the power supply fan module, and press down on the tab to unlock the hinged handle. As shown in Figure 3-1, this tab locks the handle in the closed position. Press down on the tab to unlock the hinged handle. Figure 3-1. Unlock the Hinged Handle on the Power Supply Fan Module 2. Locate the panel where you will insert the redundant power supply fan module shipped with this upgrade kit. See Figure 3-2. As you insert the fan module, this hinged panel rotates up and out of the way. 3. With the hinged handle open, insert the power supply fan module as shown in Figure 3-2. 4. Press the power supply fan module into the connector and swing down the hinged handle to lock the fan module into place. 12