HP LaserJet 4 Service Manual - Page 228

Message on LJ 5/5M/5N INCOMPATIBLE TRAY 3 INSTALLED INITIALIZING (powerup only) INSTALL TONER CARTRIDGE INSTALL TRAY 2 INSUFFICIENT MEMORY, JOB CLEARED INSUFFICIENT MEMORY, PRINTING AT 300 DPI MANUALLY FEED [envelope size] MANUALLY FEED [paper size] MEMORY LOW, PAGE SIMPLIFIED MEMORY SETTINGS CHANGED OFFLINE [personality] MEMORY FULL, STORED DATA LOST PLEASE WAIT POWERSAVE ON PRINTING CONFIGURATION PAGE PRINTING DEMO PAGE PRINTING FLASH PAGE PRINTING FONT LIST PROCESSING JOB READY REMOVE DUPLEX JAM Recommendations Indicates that a lower cassette has been installed that is not compatible with the LJ5. Press GO to clear the error. The tray will not appear in any control panel or PJL messages. See 05 SELF TEST See 14 EP CART See PC INSTALL See W3 JOB ABORTED See W4/7 JOB 300/[page protect size] See ME FEED [envelope size] See MF FEED [paper size] See W1 IMAGE ADAPT See WM MEM CNFIG N/A or WM CHK MEM CNFIG See 00 OFFLINE See WM [Personality] MEM FULL This message is displayed whenever the device is in the process of flushing the pipeline so it can go offline or into the menus. (Takes the place of the flashing Online indicator.) See 00 POWERSAVE See 05 SELF TEST / 06 PRINTING TEST See 06 DEMO PAGE This message is displayed while a flash file system page is being formatted and printed. Upon successful completion, the device returns to an online and ready state. See 06 TYPEFACE LIST This message is displayed whenever the device is actively processing a user's job. (Takes the place of the flashing Ready indicator.) See 00 READY See 13 DUPLEX JAM 7-B LaserJet 5 Error Map