HP LaserJet Enterprise M610 User Guide - Page 35
button to accept the detected type, printer control panel.
View all HP LaserJet Enterprise M610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Load paper into the tray. Check the paper to verify that the guides touch the stack, but do not bend it. For information about how to orient the paper, see Table 2-2 Tray 2 and the 550-sheet trays paper orientation on page 27. NOTE: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator. NOTE: If the tray is not adjusted correctly, an error message might appear during printing or the paper might jam. 4. Close the tray. 5. The tray configuration message displays on the printer control panel. 6. Touch the OK button to accept the detected type and size, or touch the Modify button to choose a different paper size or type. For custom-size paper, specify the X and Y dimensions for the paper when the prompt displays on the printer control panel. 7. Select the correct type and size, and then touch the OK button. 26 Chapter 2 Paper trays X Y ENWW