HP LaserJet M4000 HP LaserJet M4345 MFP - Software Technical Reference (extern - Page 237
Rendezvous, IP Printing, If you are using Rendezvous, carry out the following step, Printer Model
View all HP LaserJet M4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
4. Click Add (or the Set Up Printers... button in the Print & Fax screen, and then Add) to open the add printer screen. Macintosh Figure 6-22 Add printer screen 5. Select the network connection protocol in the top pull-down menu. The two supported protocols are Rendezvous and IP Printing. NOTE Rendezvous is the easiest method and is the best method to use if the device is installed on your local network. IP Printing must be used if you are installing the device on a different network. If you are using Rendezvous, carry out the following step: Select the HP LaserJet M4345 MFP in the Name list. The Printer Model and Model Name are selected automatically. NOTE If you are on a network that has more than one HP LaserJet M4345 MFP, print a configuration page and match the Rendezvous Printer Name to the name on the list to identify the device you are installing. (See Print the configuration page .) NOTE If the HP LaserJet M4345 MFP does not appear in the list, verify that the device is powered on and connected to the network. If it still does not appear, try turning the device off and then on again. Finally, turn the computer off and then on again, then restart the setup process. For more troubleshooting information, see Troubleshooting the printer setup. ENWW Macintosh install and uninstall instructions 217