HP LaserJet MFP M232e User Guide - Page 16
Connect your printer to a Wi-Fi network using HP Smart, Wireless models. See
View all HP LaserJet MFP M232e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Connect your printer to a Wi-Fi network using HP Smart NOTE: This section is applicable to wireless printers only. Install the HP Smart app on your computer or mobile device and use the app to set up or connect the printer to your Wi-Fi network. For information about HP Smart including where to download the app, see Use the HP Smart app to print, scan, and manage. 1. Make sure your computer or mobile device is connected to your Wi-Fi network. On your mobile device, turn on Bluetooth and location services. NOTE: HP Smart uses Bluetooth for printer setup. It does not support Print using Bluetooth. 2. If your printer Wi-Fi was previously turned off, make sure to turn it on. For more information about wireless status, see To turn on or off the wireless capabilities of the printer. 3. If the printer is no longer in wireless setup mode, restore the printer network settings. See To restore network settings to default settings. NOTE: For some printers or models, the purple light will start pulsing in the Status light bar or the Wireless light will blink when the printer is in wireless setup mode. 4. Open the HP Smart app on your computer or mobile device. See Use the HP Smart app to print, scan, and manage. 5. From HP Smart, click or tap (the Plus icon) or Add Printer, and then choose the option to select or add a printer. If prompted, allow Bluetooth and location permissions. Follow the instructions to add the printer to your network. 6. When prompted, create an HP account and register the printer. NOTE: When the printer is connected successfully, the Wireless light stops blinking and remains lit (for all Wireless models). See Printer views. ENWW Connect your printer to a Wi-Fi network using HP Smart 11