HP LaserJet Managed Flow MFP M830 User Guide 2 - Page 32
instructions on the control panel to change the, size. If the configuration is not correct
![]() |
View all HP LaserJet Managed Flow MFP M830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
3. Load paper into the tray. Check the paper to verify the guides lightly touch the stack, but do not bend it. NOTE: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator. NOTE: If the tray is not adjusted correctly, an error message might appear during printing or the paper might jam. 4. Close the tray. 5. The control panel shows the tray's paper type and size. If the configuration is not correct, follow the instructions on the control panel to change the type or size. 6. For custom-size paper, you need to specify the X and Y dimensions for the paper when the prompt displays on the product control panel. 22 Chapter 2 Paper trays Y X ENWW
![](/manual_guide/products/hewlettpackard-laserjet-enterprise-flow-mfp-m830-user-guide-2397b6e/32.png)
3.
Load paper into the tray. Check the paper to verify
the guides lightly touch the stack, but do not bend
it.
NOTE:
To prevent jams, do not overfill the tray.
Be sure that the top of the stack is below the tray
full indicator.
NOTE:
If the tray is not adjusted correctly, an
error message might appear during printing or the
paper might jam.
4.
Close the tray.
5.
The control panel shows the tray’s paper type and
size. If the configuration is not correct, follow the
instructions on the control panel to change the
type or size.
6.
For custom-size paper, you need to specify the X
and Y dimensions for the paper when the prompt
displays on the product control panel.
Y
X
22
Chapter 2
Paper trays
ENWW