HP LaserJet P3000 HP LaserJet P3005 - User Guide - Page 132
Close Top Cover And Front Door, Genuine Hp Supplies Designed
View all HP LaserJet P3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Control panel message Description Recommended action Canceling... The device is in the process of canceling a job. The message appears while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. Checking paper path The engine is turning the rollers to check for No action necessary. possible jams. Checking printer CHOSEN PERSONALITY NOT AVAILABLE alternates with The engine is performing an internal test. The device encountered a request for a personality that did not exist in the device. The job is cancelled and no pages are printed. No action necessary. ● Press to continue. ● Try a different driver. To continue press CLEANING DISK X% COMPLETE alternates with DO NOT POWER OFF The memory disk is being cleaned. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the device. Wait for the process to complete. The device automatically restarts at the end of the cleaning process. Cleaning... The device is processing the cleaning page. No action necessary. Clearing event log This message appears while the event log is No action necessary. cleared. The device then returns to the SERVICE menu. Clearing paper path The device jammed or detected misplaced No action necessary. media. The device is attempting to eject these pages automatically. CLOSE TOP COVER AND FRONT DOOR CODE CRC ERROR Creating...CLEANING PAGE The top cover and front door need to be closed. An error has occurred during a firmware upgrade. The device is generating a cleaning page. The device returns to the Ready state after the cleaning page is printed. Close the top cover and front door. ● Reinstall the firmware. ● If the problem persists, contact HP Support. ● Load the cleaning page into tray 1. ● Press Menu. ● Select PRINT QUALITY, and then press ● Select PROCESS CLEANING PAGE, and then press DATA RECEIVED alternates with Ready The device received data and is waiting for a form feed. When the device receives another file, the message disappears. The device is paused. If the device is waiting for a form feed, press to continue. If the device is paused, press Stop to continue. Event Log Empty SHOW EVENT LOG was selected from the No action necessary. control panel, and the event log is empty. GENUINE HP SUPPLIES DESIGNED FOR alternates with This genuine HP supply was not designed for this device and is not supported. The device can print with this supply, but print quality might be affected. Replace this supply with a genuine HP supply that is designed for this device. 120 Chapter 7 Problem solving ENWW