HP LaserJet Pro 300 HP LaserJet Pro 300 and 400 Color M351 and M451 - User Gui - Page 36
Network Setup menu - service manual
View all HP LaserJet Pro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Network Setup menu Use this menu to establish network configuration settings. Items that have asterisks (*) indicate the factory default setting. Menu item Wireless Menu (wireless products only) NOTE: You can also access this menu by pressing the Wireless button on the front of the product. Sub-menu item Direct WiFi WPS Setup TCP IP Config Network Test Wireless Off/On Automatic* Manual Auto Crossover Network Services Show IP Address On* Off IPv4 IPv6 No Yes* Link Speed HTTPS Enforced Restore Defaults Automatic* 10T Full 10T Half 100TX Full 100TX Half No* Yes Description Provides the product's Direct Wifi name, so you can access it from other wireless devices that support the WiFi Direct protocol. If your wireless router supports this feature, use this method to set up the product on a wireless network. This is the simplest method. Tests the wireless network and prints a report with the results. Enable or disable the wireless network feature. Select the Automatic option to automatically configure all the TCP/IP settings. Select the Manual option to manually configure the IP address, subnet mask, and default gateway. Enables or disables the use of a standard 10/100 network cable when the product is directly connected to a computer. Enable or disable the IPv4 and IPv6 protocols. By default, each protocol is enabled. No: The product IP address will not appear on the control panel display. Yes: The product IP address will appear on the control panel display. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. Sets the product so it communicates only with Web sites that use hypertext transfer protocol secure (HTTPS). Restores the network configuration settings to the default values. 18 Chapter 2 Control panel menus ENWW