HP M3035 HP LaserJet M3027 and M3035 MFP Product Series - Solutions provided b - Page 4

¾ Display does not go back to the home screen after time out or pressing Reset from the Time Zone screen. ¾ Help text for time zone not localized correctly. ¾ Date Formatting was incorrect in certain languages. ¾ Many of the internal pages that can be printed from the HP Easy Select Control panels Administration menu are not localized correctly in Japanese, Chinese and Korean languages. ¾ Special Characters are not accepted in an MFP device password. ¾ A 49.FF03 or 49.FF04 may be presented on the HP Easy Select control do to certain conditions encountered by the Embedded Jet Direct port. ¾ A 49.4C04 error may be presented on the control panel when printing certain PDF files. ¾ A 49.4C02 error may be presented on the control panel when printing with hostprint / VPS print jobs. ¾ You may see a 49.4C02 error while printing certain files from the Macintosh PS driver. ¾ A 49.205A error may be presented on the HP Easy Select control when printing certain jobs that require the paper type to be set to Letterhead and contain a paper size of A5, B5 or EXEC. ¾ A 49.4c27 may error if a hard key is pressed quickly after confirming authentication credentials. ¾ Cleaning page doesn't work correctly Analog Fax: ¾ The date stamp on received faxes prints improperly when the device is set to Chinese, Japanese, Korean and Russian language. ¾ Stored fax jobs can now be printed from within Job Storage. ¾ Receiving fax will fail if the TSI (Transmitting Subscriber Identification) contains a multi-byte character (e.g. Asian character). The error message is typically "Communication Error (2)". ¾ All internal information pages, including the fax reports, are now localized to Japanese, Korean and Chinese. Digital Sending: Note: Fixes or improvements may not be applicable to M 3027 ¾ When sending an email, the time on the attached image's header will be ahead by one hour of when the email is sent. ¾ Unable to send to ad-hoc folder destination. ¾ Send to Network Folder fails if the default filename is changed within the same session after sending a job with the original default filename. ¾ Pressing the Reset button during a Send to Network Folder operation may cause a 49 error. Page 4 of 5