HP MSA2324sa HP 2000 G2 Modular Smart Array Controller Firmware M113R10 Releas - Page 17

Supersedes history, February 2012

Page 17 highlights

• Issue: Some entries in the SMU and CLI are not localized properly for all languages. • Workaround: HP is continually updating localized content. • Issue: Some configuration changes under heavy I/O may return a communication error. • Workaround: Retry configuration changes during a period of lower I/O. • Issue: Some cached data in the browser may not be updated while navigating through the SMU. • Workaround: Press CTR + F5 to refresh or log out and back into the SMU. • Issue: The tree view for a vdisk in SMU may not function properly. • Workaround: Click the ++ symbol at the top of the tree view. This refreshes the screen and enables the tree view. • Issue: In single controller mode, some event log descriptions can indicate a second controller. • Workaround: These messages can be safely ignored. • Issue: During drive firmware upgrade, all volumes are taken offline to preserve data integrity. • Workaround: Plan drive firmware updates during a maintenance window. • Issue: In an HP c-Class BladeSystem environment, VMWare may fail I/O during failover operations. • Workaround: The VMWare kernel parameter ResetOnFailover must be set to 0 in order for array failover to work properly. • Issue: The serial number for a volume returned by the SMU and CLI does not match the serial number returned by VPD data. • Workaround: Serial numbers are shown in different formats. The last 16 digits of the serial number are unique for each volume and match between the CLI, SMU, and VPD data. • Issue: You can not create volumes for OpenVMS using the Provisioning Wizard or Create Volume Set pages of the SMU. • Workaround: Volumes for OpenVMS may only be created using the Create Volume page of the SMU. • Issue: If an error occurs before the provisioning wizard is complete then partial commits of configuration changes will be made. The provisioning wizard cannot be used to complete the configuration changes. • Workaround: Use the Create Volume Set and Default Mapping pages of the SMU to complete the configuration. Supersedes history Firmware Version M113R11 M112R14-03 M112R14-02 M111R06-07 M111R06-04 M111R06 M110R28-02 M110R28 M110R25 Effective date February 2012 Release date February 2012 August 2011 May 2011 October 2010 August 2010 August 2010 April 2010 March 2010 December 2009 Supersedes history 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Issue:
Some entries in the SMU and CLI are not localized properly for all languages.
Workaround:
HP is continually updating localized content.
Issue:
Some configuration changes under heavy I/O may return a communication error.
Workaround:
Retry configuration changes during a period of lower I/O.
Issue:
Some cached data in the browser may not be updated while navigating through the SMU.
Workaround:
Press
CTR + F5
to refresh or log out and back into the SMU.
Issue:
The tree view for a vdisk in SMU may not function properly.
Workaround:
Click the
++
symbol at the top of the tree view. This refreshes the screen and enables the tree view.
Issue:
In single controller mode, some event log descriptions can indicate a second controller.
Workaround:
These messages can be safely ignored.
Issue:
During drive firmware upgrade, all volumes are taken offline to preserve data integrity.
Workaround:
Plan drive firmware updates during a maintenance window.
Issue:
In an HP c-Class BladeSystem environment, VMWare may fail I/O during failover operations.
Workaround:
The VMWare kernel parameter
ResetOnFailover
must be set to 0 in order for array failover to work
properly.
Issue:
The serial number for a volume returned by the SMU and CLI does not match the serial number returned by VPD
data.
Workaround:
Serial numbers are shown in different formats. The last 16 digits of the serial number are unique for each
volume and match between the CLI, SMU, and VPD data.
Issue:
You can not create volumes for OpenVMS using the
Provisioning Wizard
or
Create Volume Set
pages of the SMU.
Workaround:
Volumes for OpenVMS may only be created using the
Create Volume
page of the SMU.
Issue:
If an error occurs before the provisioning wizard is complete then partial commits of configuration changes will
be made. The provisioning wizard cannot be used to complete the configuration changes.
Workaround:
Use the
Create Volume Set
and
Default Mapping
pages of the SMU to complete the configuration.
Supersedes history
Release date
Firmware Version
February 2012
M113R1
1
August 2011
M112R14-03
May 2011
M112R14-02
October 2010
M111R06-07
August 2010
M111R06-04
August 2010
M111R06
April 2010
M110R28-02
March 2010
M110R28
December 2009
M110R25
Effective date
February 2012
Supersedes history
17