HP MSA50 StorageWorks Modular Smart Array 50 Storage Enclosure User Guide - Page 13
Operations, Power up the storage enclosure - cable
View all HP MSA50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13 Operations In this section Power up the storage enclosure ...13 Power down the storage enclosure 14 Important Safety Information Before installing this product, read the Important Safety Information document provided. Power up the storage enclosure Observe the following guidelines before powering up the storage enclosure: • Always install all components of the storage enclosure. • Install hard drives in the storage enclosure so the connected host controller can identify and configure them at power up. To power up the storage enclosure: 1. Complete server hardware installation and cabling. Refer to the server documentation. 2. Connect the SAS cables and power cords to the storage enclosure. 3. Press the Power On/Standby button. Wait and observe the system power LED and controller display. When the storage enclosure powers up, the system power LED illuminates solid green. 4. Power up the servers. Refer to the server documentation.