HP MSA50 StorageWorks Modular Smart Array 50 Storage Enclosure User Guide - Page 27
Hardware options installation, Hard drive options, SAS and SATA hard drive guidelines
View all HP MSA50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
27 Hardware options installation In this section Hard drive options ...27 Hard drive options The storage enclosure supports up to 10 SFF SAS drives. Always populate hard drive bays starting with the lowest drive number ("SAS and SATA drive numbers" on page 10). SAS and SATA hard drive guidelines When adding hard drives to the storage enclosure, observe the following general guidelines: • The system automatically sets all drive numbers. • If only one hard drive is used, install it in the bay with the lowest drive number ("SAS and SATA drive numbers" on page 10). • Hard drives must be SFF types. • Drives must be the same capacity to provide the greatest storage space efficiency when drives are grouped together into the same drive array. NOTE: ACU does not support mixing SAS and SATA drives in the same logical volume. Installing a SAS or SATA hard drive 1. Power down the storage enclosure (on page 14).