HP MSL4048 HP StorageWorks MSL2024 Tape Library firmware release notes Version - Page 4

Installation instructions, Determining current version, Effective date - download

Get HP MSL4048 - StorageWorks Ultrium 920 Tape Library PDF manuals and user guides
UPC - 882780742215
View all HP MSL4048 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

• The Library temperature is now reported on LOG SENSE page 0x0D. • Fixed a case where the Library could not detect when the mailslot was closed very quickly. Installation instructions To upgrade firmware from the RMI: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http://www.hp.com/support/storage. 2. Log into the RMI as the administrator user. 3. In the Support: Firmware page, browse to the location of the Library firmware file. 4. Click Update. To upgrade firmware from the OCP using a USB flash drive: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http://www.hp.com/support/storage. Copy the firmware onto the USB flash drive. 2. Insert the USB flash drive into the USB port on the back of the Library. 3. From the Home screen, press Next until the screen displays Support. Press Enter to select. 4. Press Next until the screen displays Library FW upgrade. Press Enter to select. 5. Enter the administrator password if prompted. 6. Press Next until the screen displays the filename of the Library firmware file on the USB drive. Press Enter to select the firmware file. 7. If the upgrade failed, press Enter to display the error code and message describing the cause of the failure. 8. When the upgrade is complete, remove the USB flash drive from the USB port. Determining current version To find the version of firmware installed on the Library from the RMI, see the Support: Firmware screen. To find the version of firmware installed on the Library from the OCP: 1. From the Home screen, press Next until the screen displays Status/Information. Press Enter to select. 2. Press Next until the screen displays Library information. Press Enter to select. 3. Press Next until the screen displays Firmware rev.. Press Enter to select. Firmware Version 1.91 Released 5/31/2006 Status Active 3.70 3.80 4.00 2/20/2008 6/9/2008 7/7/2008 Active Active Active Effective date July 7, 2008 4

  • 1
  • 2
  • 3
  • 4
•
The Library temperature is now reported on LOG SENSE page 0x0D.
•
Fixed a case where the Library could not detect when the mailslot was closed very quickly.
Installation instructions
To upgrade
fi
rmware from the RMI:
1.
Download current
fi
rmware using HP Library & Tape Tools or from the HP support website:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
s
u
p
p
o
r
t
/
s
t
o
r
a
g
e
.
2.
Log into the RMI as the administrator user.
3.
In the
Support: Firmware
page, browse to the location of the Library
fi
rmware
fi
le.
4.
Click
Update
.
To upgrade
fi
rmware from the OCP using a USB
fl
ash drive:
1.
Download current
fi
rmware using HP Library & Tape Tools or from the HP support website:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
s
u
p
p
o
r
t
/
s
t
o
r
a
g
e
. Copy the
fi
rmware onto the USB
fl
ash drive.
2.
Insert the USB
fl
ash drive into the USB port on the back of the Library.
3.
From the Home screen, press
Next
until the screen displays
Support
. Press
Enter
to select.
4.
Press
Next
until the screen displays
Library FW upgrade
. Press
Enter
to select.
5.
Enter the administrator password if prompted.
6.
Press
Next
until the screen displays the
fi
lename of the Library
fi
rmware
fi
le on the USB drive. Press
Enter
to select the
fi
rmware
fi
le.
7.
If the upgrade failed, press
Enter
to display the error code and message describing the cause of
the failure.
8.
When the upgrade is complete, remove the USB
fl
ash drive from the USB port.
Determining current version
To
fi
nd the version of
fi
rmware installed on the Library from the RMI, see the
Support: Firmware
screen.
To
fi
nd the version of
fi
rmware installed on the Library from the OCP:
1.
From the Home screen, press
Next
until the screen displays
Status/Information
. Press
Enter
to select.
2.
Press
Next
until the screen displays
Library information
. Press
Enter
to select.
3.
Press
Next
until the screen displays
Firmware rev.
. Press
Enter
to select.
Firmware Version
Released
Status
1.91
5/31/2006
Active
3.70
2/20/2008
Active
3.80
6/9/2008
Active
4.00
7/7/2008
Active
Effective date
July 7, 2008
4