HP Management LAN Blade for bh7800 Safety & Regulatory Information, HP - Page 7

HP Blade Server bh3710 Safety and Regulatory Information Cabinet Safety Precautions WARNING Cabinets are heavy even when empty. Exercise caution when moving cabinets whether equipment is installed in the cabinet or not. Avoid rolling cabinets on rough or uneven surfaces or inclines greater than 10 degrees. Unloading cabinets from the pallet and movement of cabinets should be performed by at least two people. WARNING Slideable products are not to be extended from the cabinet while the equipment is on the shipping pallet. The cabinet must be unloaded from the pallet and both front and rear anti-tip feet properly installed prior to extending any slideable product. WARNING Once installed, both the front and rear anti-tip feet must remain in place to maintain stability. Only one slideable product must be extended at a time. WARNING Use of any slide mount product requires the installation of a cabinet anti-tip device. The anti-tip device for the following cabinet products is a pair of anti-tip feet: A4900A, A4901A, A4902A, A5134A, A5135A, A5136A, J1500A/B, J1501A/B, and J1502A/B. Additional anti-tip feet information is located at www.hp.com/racksolutions Install both front and rear anti-tip feet on the cabinet before installing any slide mount product. Before installing this product in any HP rack, you must install an anti-tip stabilzer kit and ballast kit. Failure to follow these precautions can result in damage to equipment or injury to personnel. English 7