HP Media Center m1100 Getting Started Guide - Page 45
Always turn on the, PC before you turn on, the speaker system.
View all HP Media Center m1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
4 Connect the center/subwoofer speaker cable to the gold (or pink mic) connector that matches the back of your PC. 3 6 S 7 Turn on the PC. 8 Plug in the speaker system power. 9 Turn on the speaker system. 10 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: ■ For 3 Connector systems, the pink mic connector functions as a center/subwoofer speaker line out when a multichannel audio configuration is activated. 5 Connect the cables to the audio system. 6 Connect the front, rear, and center speakers to the subwoofer. Refer to the speaker documentation. ■ 3 Connector: See "Configuring Audio Output with Multi-channel Sound Manager" on page 48. ■ 6 Connector: See "Configuring Audio Output with Sound Effect Manager" on page 51. ■ Sound Card: See "Configuring Audio Output with a Sound Card" on page 53. The following diagram shows a typical 5.1 audio installation: n Always turn on the PC before you turn on the speaker system. OUT IN Configuring Speaker and Sound Options 41