HP Mini 1003TU HP Mini 1000 Netbook - Maintenance and Service Guide - Page 41
Memory module, Remove the cover
View all HP Mini 1003TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Memory module Description 512-MB (PC2-4200, 533-MHz, DDR2) 1024-MB (PC2-4200, 533-MHz, DDR2) 2048-MB (PC2-4200, 533-MHz, DDR2) Spare part number 504599-001 504600-001 517577-001 Before removing the memory module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 32). Remove the memory module: 1. Slide the right battery release latch to the inside or "unlocked" position to reveal the release latch for the memory module compartment cover. Use a thin, narrow tool to slide the release latch to the outside or "unlocked" position (1). (The edge of the cover rises away from the device.) 2. Remove the cover (2). The memory module compartment cover is included in the Plastics Kit, spare part number 507317-001. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the device.) Component replacement procedures 33