HP Mini 1003TU HP Mini 1000 Netbook - Maintenance and Service Guide - Page 64
USB board and internal display switch, Hard drive see
View all HP Mini 1003TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
USB board and internal display switch NOTE: The internal display switch module is included in the Cable Kit, spare part number 507708-001. Description USB board Spare part number 506336-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 32). 5. Remove the following components: a. Keyboard (see Keyboard on page 35). b. Hard drive (see Mass storage devices on page 37). c. Top cover (see Top cover on page 40). d. Fan (see Fan on page 53). Remove the USB board: 1. Disconnect the internal display switch cable (1) from the USB board. 2. Remove the Phillips PM2.0×3.0 screw (2) that secures the DC jack bracket to the base enclosure. 3. Detach the USB board ribbon cable (1). The cable is attached to the battery bay with tape. 56 Chapter 4 Removal and replacement procedures