HP Mini 110-1056TU Service Guide - Page 64
Remove the battery see, To remove the mass storage assembly
View all HP Mini 110-1056TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Description Hard drive (select models only) 320-GB, 5400-RPM 250-GB, 5400-RPM 160-GB, 7200-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit Solid-state drive 64-GB 32-GB 16-GB 8-GB Solid-state Drive Hardware Kit Spare part number 591398-001 537635-001 590669-001 537634-001 537641-001 537640-001 537639-001 537638-001 537637-001 537642-001 Before removing the hard drive or solid-state drive, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 44). 5. If your device has WWAN capability, remove the SIM (see SIM on page 45). 6. Remove the keyboard (see Keyboard on page 48). To remove the mass storage assembly: 1. Loosen the Phillips SP2.5×10.0 captive screw (1), and remove the two Phillips PM2.0×5.0 screws (2) that secure the assembly to the device. 54 Chapter 4 Removal and replacement procedures